Product

CTMS Heat-shrinkable marker sleeves

KOSOO CTMS

Heat-shrinkable identification marker sleeves

Application

KOSOO CTMS heat-shrinkable identification marker sleeves are designed to meet the requirements of high- performance identification of wire and cable, tools, hoses and equipment. Made from reliable flame-retardant polyolefin with outstanding properties, sleeves can also be used as electrical insulation. Marks are permanent after printing.

Features/Benefits

·Sleeves meet the requirements of AMS-DTL-23053/5 (materials and performance).

·Flexible, highly flame-retardant.

·Sleeves meet the print performance requirements of SAE-AS81531.

·Markers can also provide insulation and strain relief.

·Marks are permanent after printing; mark performance improves after shrinking.

·Free of PCBs, PCPs, polybrominated biphenyls (PBBs), polybrominated biphenyl oxides and ethers (PBBOs, PBBEs and PBDEs) and toxic heavy metal compounds, which are classified as environmentally hazardous substances. Conform to European RoHS environmental directive.

·Operating temperature range: -55℃~125℃

·Minimum shrink temperature: 70℃

·Minimum full recovery temperature: 110℃

Specifications/Standards

UL224 E214175 125℃ VW-1

AMS-DTL-23053/5

SAE-AS81531, MIL-STD-202

Specification values

Physical properties:

Tensile strength 10.4 MPa min.

Elongation 200% min.

Low temperature flexibility (-55℃, 4hrs) No cracking

Heat shock (250℃, 4hrs) No cracking, dripping or flowing

Print performance:

UL224 50 rubs, legible

MIL-M-81531 50 rubs, legible

MIL-STD-202 30 strokes, legible

Electrical properties:

Dielectric voltage withstand 2.5KV, 60 sec No breakdown

Dielectric strength 19.7KV/mm min.

Volume resistivity 10¹⁴Ω·cm min.

Chemical properties:

Corrosion No corrosion

Flammability AMS-DTL-23053/5 Average burn time is less than 1 minute

Fluid resistance: (23℃, 24 hrs) Followed by print performancetests of

SAE-AS81531

Product sizes

mm/inch

Size (inch)	Inside diameter		Recommended use range
Size (inch)	As supplied (min.)	After recovery (max.)	Recommended use range
3/32	2.4 (0.093)	0.8 (0.031)	0.9-2.0 (0.035-0.079)
1/8	3.2 (0.125)	1.0 (0.042)	1.1-2.7 (0.044-0.105)
3/16	4.8 (0.187)	1.6 (0.062)	1.8-4.1 (0.069-0.160)
1/4	6.4 (0.250)	2.1 (0.083)	2.3-5.5 (0.091-0.215)
3/8	9.5 (0.375)	3.2 (0.125)	3.5-8.0 (0.137-0.320)
1/2	12.7 (0.500)	4.2 (0.166)	4.7-10.8 (0.183-0.425)
3/4	19.1 (0.750)	6.35 (0.250)	7.0-16.3 (0.275-0.640)
1	25.4 (1.000)	8.5 (0.333)	9.3-21.6 (0.366-0.850)
1 1/2	38.1 (1.500)	19.1 (0.750)	21.0-33.0 (0.825-1.300)
2	50.8 (2.000)	25.4 (1.000)	27.0-48.0 (1.063-1.890)